CE
European Union
EMC + LVD safety directives. Required for sale in the EU.
- Home
- /Quality
Quality & Certifications
Tested, certified, documented — every fixture
Quality is what scales OEM partnerships. Our QC program combines third-party certifications, in-house photometric testing, and 5-stage production QC.
International certifications
Verifiable test reports for every major market
Our products are tested by accredited third-party labs (Intertek, TÜV Rheinland, SGS, Bureau Veritas). All test reports are issued under our factory name — no rebranded reports.
RoHS
EU + Global
Restriction of hazardous substances — lead, mercury, cadmium and 7 others.
ETL
USA / Canada
Intertek certification to UL standards. Required by most North American distributors.
SAA
Australia / New Zealand
Standards Australia electrical safety mark. Mandatory for AU/NZ import.
CB Scheme
Global
IEC-based mutual recognition. Streamlines national certifications worldwide.
DLC
USA
DesignLights Consortium qualified products list — required for US utility rebates.
ERP
EU
EU Ecodesign / Energy-related Products Regulation 2019/2020 compliance.
TUV
Germany / Global
TÜV Rheinland / TÜV SÜD product safety and performance certification.
Need a specific certification? We can list new SKUs on DLC, ENEC, or country-specific lists on request. Project-scale customers receive free certification consulting.
Quality control process
5-stage QC — from material to container
01
IQC — Incoming Material
Every LED chip, driver, housing and diffuser is inspected on arrival. Suppliers are audited annually.
02
IPQC — In-process
Real-time SPC monitoring on SMT lines. AOI machines catch placement and solder defects before assembly.
03
100% Aging Test
Every single fixture runs 2–4 hours under load before packing. Catches infant-mortality failures.
04
FQC — Final QC
Photometric, electrical, dimensional and cosmetic inspection. AQL 0.65 acceptance level.
05
OQC — Outgoing QC
Pre-shipment inspection on packaged cartons. Photo/video sent to customer before container loading.
In-house photometric lab
LM-80 / LM-79 / IES files on every SKU
We invested in a full photometric lab so we can iterate faster and document every SKU thoroughly. Lighting designers and specifiers get IES files on request, lumen depreciation curves from real LM-80 testing, and integrating sphere measurements traceable to NIST standards.
- Integrating sphere (φ2m) — total lumen output, CCT, CRI, R9
- Goniophotometer — beam angle, candela distribution, IES files
- LM-80 chambers — 6,000+ hour lumen depreciation testing
- Surge tester (1kV–6kV), HV/Hipot tester, EMC pre-scan
Certificate library
Certificates issued in our factory's name
Open any document to view the full PDF. We never share rebranded reports — every certificate and test report below was issued directly to our factory.
Certificates & test reports
- ENEC CertificateEurope · EN standardsView PDF
- EMC CertificateEU · Electromagnetic CompatibilityView PDF
- EMC Test ReportEU · EN 55015 / EN 61547View PDF
- LVD CertificateEU · Low Voltage DirectiveView PDF
- LVD Test ReportEU · EN 60598 safetyView PDF
- SAA CertificateAustralia · New ZealandView PDF
- UL CertificateNorth America · NRTLView PDF
- RoHS Declaration of ConformityEU · 2011/65/EUView PDF
- RoHS Test Report (BST)Global · Hazardous substancesView PDF
- IP54 Ingress Protection ReportGlobal · IEC 60529View PDF
Patents & intellectual property
Our R&D team holds registered invention patents on our smart-sensing and ultra-slim LED panel designs.
FAQ
Quality & testing — what buyers want to verify
Honest answers about our reports, aging test, AQL standards and audit policy.
Ask our sales teamAre your CE / ETL / SAA test reports issued in your factory's name?
Yes — every certificate and test report we share lists FireMaple Technology Co., Limited as the applicant. We never share rebranded reports. Original PDFs can be released for verification once an NDA or sales agreement is in place.
What exactly does "100% aging test" mean at your factory?
Every finished fixture is powered on under rated load for 2 hours (4 hours for project-grade SKUs) before it goes to packaging. The aging room logs current draw and temperature for each batch. Units that fail or drift are pulled and traced back to the SMT batch.
Can I request LM-80 and IES files for any SKU?
Yes. Every SKU we have shipped to a DLC or ETL customer has both a LM-79 photometric report and an IES file on hand. We share these on request after an inquiry — no purchase commitment required.
What AQL acceptance level do you ship at?
Our final QC follows AQL 0.65 for critical defects (electrical safety, flicker, missing solder) and AQL 1.5 for cosmetic defects. We can tighten to AQL 0.4 / 1.0 for project orders on request — please specify in the quotation stage.
Do you welcome third-party factory audits?
Yes. We have hosted SGS, Intertek, Bureau Veritas, BSCI and SEDEX audits. Our team will prepare documentation, walk auditors through the production floor and provide samples for testing. Schedule directly through your audit firm and CC steven@led-lightning.com.
Need a copy of our certificates?
Send us an inquiry — we will share the original certificates and test reports for verification.